Knives at DCI Online!
Below is all the knives from DCI Online, August 29 2020. Some of the knives ar still available for purchase. If you are interested in buying a knife, please contact the knife maker.
Dragon’s breath forge – Matthew Parkinson
https://dragonsbreathforge.com/
Click on the images to enlarge them.
Dragon’s breath forge No 1
- Chef knife
- Baldur™ pattern
- Blond stablized Koa handle with 410 stainless bolster and G10 spacer
- Blade 8.25″ Overall 13″ thickness at tang 0.130 with moderate distal taper 2.375″width at heel. full height flat grind with approximately 1/3 high convex grind at edge
- Price: $1600 USD
Dragon’s breath forge No 3
- Bread knife
- Baldur™ pattern
- Stabilized blond Koa handle, with 410 stainless bolster and G10 spacer
- Blade 8.5″ overall 13.5″ thickness at tang 0.145 small amount of distal taper. heel height 2″ Blade is hollow ground on a 8″ wheel.
- Very thin behind the edge, with a scalloped serrated edge Off set handle to keep users hands off of the cutting board.
- Price: $1500 USD
Dragon’s breath forge No 4
- Nakiri
- Björkmans Twist™ pattern
- Stabilized Mango wood, sterling silver bolster and stacked G10 spacers
- Blade 6.5″ Overall 11.5 ” 0.095 ” at tang 2.25″ heel height full higher flat grind with bottom 1/4 convex . thin light knife overall. thickness reduces to approximately 0.085″ with in 1″ of tang and drops to 0.080″ at point
- Price: $1250 USD
Dragon’s breath forge No 5
- Birds beak paring knife
- Baldur™ pattern blade (forged from cut off)
- Richlite bolster G10 spacer and stabilized dyed birch handle
- 2.75″ blade 6.625 overall 0.085 at tang some distal taper, 0.55 width. hollow ground on 8″ wheel. VERY thin behind the edge
- Price: $650 USD
Dragon’s breath forge No 6
- The root, Paring knife
- Björkmans Twist™ (forged from cut off)
- Curly maple handle silver and nugold wire inlay of root veggies
- Blade 4.5″ overall 9″ thickness at tang 0.100 full distal taper. 1″ width at heel full width
- Flat grind with small amount of Convex near edge
- Price: $550 USD
Nicolaides Knives – Niko Nicolaides
https://www.instagram.com/nicolaidesknives/
Click on the images to enlarge them.
Phillips Forged No 1
- Offset Bread knife
- 9.25″ cutting edge
- 15.25′ OAL
- Balance point at heel
- 62 hrc, cryogenically treated
- Jeepium (fordite) bolster with stabilized walnut burl handle
- Odinheim™ pattern
- Sharpened front edge
- NFS-sold
Phillips Forged No 2
- Santoku
- 7″ cutting edge
- 1 7/8″ tall at heel
- 62 hrc, cryogenically treated
- Balance point at front of bolster
- Distal taper to sharp point
- 12 3/4″ oal
- Deeply etched upper with mirror polished edge
- Vinland™ pattern
- Pinch grip sculpted bolster- synthetic horn
- Stabilized Cottonwood burl handle, brass spacers
- Price: $1550 USD
Phillips Forged No 3
- Chef
- 7 1/2″ cutting edge
- 2″ at heel
- 62 hrc, cryogenically treated
- Balance point at front of bolster
- Distal taper to sharp point
- 12 7/8″ oal
- Thin convex blade geometry
- Bifrost™ pattern
- Stabilized black palm bolster and handle
- Pinch grip sculpted bolster
- $1450 USD
Phillips Forged No 4
- Nakiri
- 7 1/2″ primary cutting edge plus fully sharpened front edge
- 12 7/8″ oal
- 62 hrc, Cryogenically treated
- Balance point between bolster and fuller
- Fullers to reduce weight, increase rigidity and aid in food release
- Thin convex blade geometry
- 2 tone etch with mirror polished edge and fullers
- Synthetic horn bolster
- Stabilized tiger stripe Koa wood handle
- Grosserosen™ pattern
- Price: $1600 USD
Phillips Forged No 5
- Pair of Paring Knives
- 4 1/4″ cutting edge
- 9 1/8″ oal
- 62 hrc, Cryogenically treated
- Stacked Richlite handle made from recycled paper and bamboo
- Thin convex geometry with distal taper
- Designed to be used for everyday tasks and also serve as premium steak knives
- Grossererosen™ pattern
- Price: $1200 USD (sold as a pair only)
Drew Hash Knives No 1
- Integral paring knife
- 4 1/2″ blade Fenja™ pattern
- 15/16 tall blade
- 5″ handle bog oak, copper spacer and red abalone inlay
- Auction price starting at $400 USD
Drew Hash Knives No 3
- Small Nakiri with Maple handle
- Ladder™ pattern Damasteel blade and dense twist collar
- Coined bronze spacer
- 5” splated dyed maple “waffin” handle
- Black G10 pin
- Blade height is 2 3/8” at heel and 1 5/16” at tip
- .094” thick at collar dital tapering to .088 at tip
- 11 1/8” overall length
- Auction price starting at $950 USD
Drew Hash Knives No 5
- Large Nakiri with Ironwood handle
- 12 1/2” overall length
- 7 ½” blade Ladder™ pattern
- Ladder pattern collar
- Desert ironwood “waffin” handle is 5” long
- 2 ½” tall at heel 1 7/8” at tip tall
- .095 thick at collar tapering to .080 at tip
- coined bronze spacer and bronze pin
- Auction price starting at $1100 USD
Fingal Ferguson Knives – Fingal Ferguson
https://www.fingalfergusonknives.com/
Click on the images to enlarge them.
Fingal Ferguson Knives No 1
- Weight = 165 grms
- Total length = 12”
- Blade length = 6”
- Thickness = 2.5mm tapered
- Pattern: Odins eye™
- Handle is stabilised poplar burl from Raffir products with G10 liners
- Price: €500 Euro
Fingal Ferguson Knives No 3
- Weight = 127
- Total length = 11”
- Blade length = 6”
- Thickness = 2.5mm tapered
- Pattern: Odins eye™
- Handle is Stabilised Raffir dyed maple burl on black G10 liners
- Price: €500 Euro
Kevin Cross Knives – Kevin Cross
https://www.kevincrossknives.net/
Click on the images to enlarge them.
Kevin Cross Knives No 1
- Chef
- 7.6 oz
- Blade length 8.5″ (215 mm)
- Over all Length 13.5″ (343 mm)
- Height at heal 2″ (50 mm)
- Handle Dark blue acrylic pine cone
- Pattern Odin’s Eye™
- Price: $950 USD
Kevin Cross Knives No 3
- Santuko
- Blade length 6″ (150 mm)
- Overall length 11″ (280 mm)
- Height at heal 2″ (50 mm)
- Weight 6 oz
- Handle Ironwood
- Pattern Hakkapella™
- Price: $850 USD
Kevin Cross Knives No 5
- Bread
- Blade length 10 5/8″ (270 mm)
- Overall length 15 3/8″ (390 mm)
- Weight 5.7 oz
- Handle Multi-color micarta
- Pattern Bifrost™
- Price: $900 USD
Kevin Cross Knives No 7
- Bread knife
- Blade length 10″ (255 mm)
- Overall length 15.25″ (388 mm)
- Weight 5.4 oz.
- Handle Red/white/black acrylic swirl
- Pattern: Bifrost™
- Price: $900 USD
Leucadia Custom Knives – Scott Wing
Click on the images to enlarge them.
Leucadia Custom Knives No 1
- Chef Knife
- 9″ long blade; 14″ overall
- Thor™ pattern
- Exhibition-grade Hawaiian Koa wood scales w/ copper pins
- spine thickness .10″ (2.7mm); Heel height 2.1″ (53mm); Weight 8.8 oz. (249 grams)
- Price: $1200 USD
Leucadia Custom Knives No 3
- Fillet-Style Knife
- Gyuto-Style Chef Knife
- 8″ long blade
- 13.5″ overall length
- Vinland™ pattern
- Exhibition-grade Hawaiian Koa wood scales w/ copper pins; spine thickness .85″ (2.2mm)
- Heel height 1.8″ (47mm); Weight 6.8 oz (193 grams)
- Price: $1100 USD
NHB Knifeworks – Nathaniel Bonner
https://www.nhbknifeworks.com/
Click on the images to enlarge them.
NHB Knifeworks No 1
- “Dark horse”
- Blade length is approx 9 inches
- Blade width is approx 2 inches
- Thickness at base of spine approx .078 inches
- Feather weight chef
- Price: $950 USD
NHB Knifeworks No 3
- “Ghost in the trees”
- Blade length is approx 9 inches
- Blade width is approx 2 inches
- Thickness at base of spine approx .078 inches
- Feather weight chef
- Fixed price: $950 USD
NHB Knifeworks No 5
- “Big tree”
- Blade length is approx 8 inches
- Blade width is approx 1.2 inches
- Thickness at base of spine approx .076 inches
- Light weight slicer
- Price: $800 USD
Oatley Knives No 1
- Chinese cleaver
- Vinland™
- 210mm x 100mm
- 64rc carbon fibre handle and Vinland™ spacer
- Price: ask the knife maker
Studio Blade No 1
- Total Length: 260mm
- Blade length: 150mm
- Thickness: 2.5mm
- Weight: 146 gram
- Full flat grind
- Pattern: Bifrost™
- Rockwell Hardness: 61-62 HrC
- Handle material: Water Buffalo, Stabilised Elm Burl, blue & black liners
- Price: €950 Euro
Studio Blade No 3
- Total Length: 297mm
- Blade length: 172mm
- Thickness: 2.5mm
- Weight: 186 gram
- Full flat grind
- Bifrost™
- Rockwell Hardness: 61-62 HrC
- Handle material: Arizona Desert Ironwood, black canvas Micarta, black & blue liners
- Price: €1350 Euro
The Artificery – William Brigham
https://www.theartificery.com/
Click on the images to enlarge them.
The Artificery No 1
- Heimskringla™ Feather #1
- Blonde Amboyna Handle
- 6.75″ Blade
- Stacked and feathered heimskringla pattern
- Price: $2125 USD + $30 USD insured shipping in US (International shipping varies)
Triple B Handmade – Shawn Houston
https://www.triplebhandmade.com/
Click on the images to enlarge them.
California Custom Knives – Don Carlos Andrade
http://californiacustomknives.com/
Regarding Don’s knives – contact him directly.
Fifty 50 Knives – James Milne
Regarding James’s knives – contact him directly.
Promethean Knives – Salem Straub
https://www.prometheanknives.com/
Regarding Salem’s knives – contact him directly.